二次元学姐4 SWITCHING ON THE POWER SUPPLY
12
1 Insert the power plug into an electricaloutlet.
Approx. 5 cm
3
2 Turn the lock switch key to the“open”position. position.
3 Slide the power switch to the“on”6 ATTACHING THE BACK CUSHION AND PILLOW
1 Attach the back cushion using the zipper. 2 Attach the pillow using the fasteners.7 CONNECT THE POWER CORD TO THE UNITAppliance inlet Power switch section Power cord Connector
5 CHECK THE UNIT
3 1 4
1 Make sure the covering is free of rips or tears. 2 Make sure there are no obstacles betweenthe parts of the unit.
3 Make sure the massage heads are in theIf not retracted, press retracted position.
1 Check for dirt and damage on appliance inlet of the power switch section and the connector of the power cord. 2 Insert the connector into the appliance inlet. 3 Be sure to push the connector in all the way.
retracted position, i.e. they are parked to the left and right in the upper part of the backrest.twice to return the massage heads to the
sure 4 Make sit on thethe legrest isis lowered. may cause it to Do not legrest when it raised. Doing socollapse down or bend the legrest. The legrest is not meant to support full body weight. See Warning No. 8 on page 1 and No. 7 and 1 on page .
BEFORE USING THE UNIT1 CHECK THE SURROUNDING AREAMake sure there are no objects, people, or pets in the vicinity of the unit.
6 ADJUSTING FOR CORRECT PILLOW HEIGHTFasteners
If positioned too low, the pillow can lessen the effect of massage around the neck area.
Adjust the pillow height so that the bottom edge of the pillow is at ear level.
Fasteners
2 CHECK THE POWER CORD AND THE POWER PLUGSee Warning No. 7 on page 1.
7 ADJUSTING THE RECLINING ANGLE Press and to adjust the angle of the backrest and legrest.
With either butto
n held down, movement will continue until a“beep-beep-beep” sound indicates the legrest or backrest has been raised or lowered as far as possible. The legrest will start to move shortly after the backrest. Approx. 120 Approx. 80
3 BE SURE TO PUSH THE CONNECTOR ALL THE WAY INTO THE APPLIANCE INLETApprox. 170 Approx. 0 English English
*The reclining operation is a function that adjusts the angle of the backrest and legrest. Avoid using it for any other purposes, such as continuous up/down operation etc.
7
8
7-8
2010/07/09
11:16:38
EP-MA02使用说明书
1
USING PRE-PROGRAMS AND QUICK MASSAGE OFF/ON button. 1 Press the indicator will come on. The OFF/ONthe pre-program you 2 Selectpress one of the flashing buttons. want. Please If you press another Pre-Program button or a manual operation button during your selected pre-program massage, the massage will switch to the newly selected massage. In pre-programs, the leg massage begins at the same time. It is possible to stop or change the intensity of the leg massage during the program. (See Page 1) Pressing a Pre-Program button automatically moves the backrest and legrest into massage position.
Persons whose height is less than 10 cm or more than 185 cm are recommended to use the unit in the manner described below when the massage heads do not touch their shoulders. Height is around 140 cm or less Use by placing a cushion on the seat and sitting as far back as possible. Height is around 185 cm or more Use by reclining the backrest and sliding your body downward.
2
3 Sit as far back in the seat as possible with your headon the pillow. position 4 Adjusting shoulderindicator is flashing, adjust the position of the When the shoulder positionmassage heads (upper heads) so that they lightly touch the shoulders.
5 As you like
A Selecting an area for a focused massageMassaging the Neck and Shoulders Massaging the Lower Back The upper and lower back will also be massaged slightly. Press *Press the button again to toggle it off. Press The neck and shoulders will also be massaged slightly.
Too high
B Removing tapping from pre-programs*Press the button again to restore tapping to the program.
4
Correct position Lightly touching the shoulder. Too low Up Down Approximate Height 185 cm Press Press 160 cm 10 cm
Press
C Adjusting leg massage Please see page 1 for details regarding leg massage. Adjust the legrest so your sole fits on it. Switch off the leg stretch function to stop the legrest from returning to the original position. For a person with large body dimensions You can relax by lowering the legrest.
Press For a person with small body dimensions If the legrest is raised, it is easier to fit your sole on it.
5-Stage adjustment (up and down approx. 10 cm) It is possible to change the position of the massage heads during the massage. When it is not possible to correctly adjust the shoulder position, you may have to slide your body and adjust it again.
About the Time IndicatorTime Rema
ining Approx. 15 min. Approx. 9 min. Approx. min. Displays remaining massage time via flashing LED. Starts counting down from 15 minutes in increments of approximately minutes. Flashing speeds up one minute before end of massage.
