RHEL5_LVS+cluster配置(5)

$ ./vs-up.sh

此时Routing server的配置基本完成，在“/etc/init.d/pulse restart”让所有改动生效后，用一下两个命令检验设置：

$ ipvsadm

IP Virtual Server version 1.2.1 (size=4096)

Prot LocalAddress:Port Scheduler Flags

-> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 9.125.91.254:http wlc

->9.125.91.60:http Route 1 3 0

$ifconfig

eth0 Link encap:Ethernet HWaddr 00:11:25:97:1C:39

inet addr:9.125.91.239 Bcast:9.125.91.255 Mask:255.255.255.0

inet6 addr: fe80::211:25ff:fe97:1c39/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:19470 errors:0 dropped:0 overruns:0 frame:0

TX packets:11199 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:100

RX bytes:2114994 (2.0 MiB) TX bytes:1075789 (1.0 MiB)

Base address:0x2000 Memory:e8100000-e8120000

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

inet6 addr: ::1/128 Scope:Host

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:4085 errors:0 dropped:0 overruns:0 frame:0

TX packets:4085 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:6479927 (6.1 MiB) TX bytes:6479927 (6.1 MiB)

lo:0 Link encap:Local Loopback

inet addr:9.125.91.254 Mask:255.255.255.255

UP LOOPBACK RUNNING MTU:16436 Metric:1

如果看到这两个结果，Routing server就配好了。