一枚小可爱Parameterization and commissioning参数设置和调试
Start-up behavior of the Bus Coupler总线耦合器的启动行为
Start-up Behavior of the Bus Coupler总线耦合器的启动行为
Immediately after being switched on, the Bus Coupler checks, in the course of a self test, all the functions of its components and the communication on the K-Bus/E-Bus. The red I/O LED blinks while this is happening After completion of the self-test, the Bus Coupler starts to test the attached Bus Terminals (the Bus Terminal Test), and reads in the configuration. The Bus Terminal configuration is used to generate an internal structure list, which is not accessible from outside. In case of an error, the Bus Coupler enters the STOP state. Once the start-up has completed without error, the Bus Coupler enters the fieldbus start state.
立刻被接通时，总线耦合器的检查，在自检的过程后，其组件的全部功能和K总线/ E总线的通信。红色的I / O LED闪烁，而这种情况正在发生自检完成后，总线耦合器开始测试连接的总线端子（汽车总站测试），并读取配置。总线端子配置用来产生内部结构列表，这是不能从外部访问。在出错的情况下，总线耦合器进入停止状态。一旦启动后已经完成，没有错误，总线耦合器进入现场总线启动状态。
