坦然理解7
High Performance Green
DeviceSeries
HDSP-Parameter
Luminous Intensity/Segment[1,2] (Digit Average)`
Forward Voltage/Segment or DP
56XX
Peak WavelengthDominant Wavelength[3,7]
Reverse Voltage/Segment or DP[4]Temperature Coefficient ofVF/Segment or DP
Thermal Resistance LED Junction-to-Pin
SymbolIV
3100
VFλPEAKλdVR VF/°CRθJ-Pin
3.0
2.156657150-2345
5772.5
VnmnmVmV/°C°C/W/Seg
IR = 100 µA
Min.900
Typ.
2500
µcd
IF = 60 mA Peak:1 of 6 dfIF = 10 mA
Max.
Units
Test ConditionsIF = 10 mA
Notes:
1. Device case temperature is 25°C prior to the intensity measurement.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color ofthe device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs HDSP-H10X series displays are recommended. They are tested at 1 mA dc/segment and arepin for pin compatible with the HDSP-H15X series.
6. For low current operation, the HER HDSP-555X series displays are recommended. They are tested at 2 mA dc/segment and are pinfor pin compatible with the HDSP-550X series.
7. The Yellow (HDSP-5700) and Green (HDSP-5600) displays are categorized for dominant wavelength. The category is designated bya number adjacent to the luminous intensity category letter.
