loading
WATERBORNE
WAC61753
Technical Data Sheet
Ver 1 PRODUCT CODE: WAC61753 PRODUCT DESCRIPTION: warm Black Waterborne Basecoat LOCATION: PPG Tianjin DATE: 9/01/2004
PHYSICAL PROPERTIES:
SOLIDS % BY WEIGHT: SOLIDS % BY VOLUME: WEIGHT-PER-LITER: COVERAGE: GLOSS 60?: COLOR:
PACKAGE VISCOSITY @ 25?C: VOC [MAXIMUM] HAPS: SHELFLIFE: FLASHPOINT:
+/- % +/%
+/- g/L +/- lbs/gal)
13 m2 per liter per mil at 100% efficiency N/A Black
>50 seconds DIN 4mm Cup Less than 480 g/L Available upon request 6 months at 25°C N/A
APPLICATION:
METHOD: VISCOSITY: PAINT TEMPERATURE: PARTS PRODUCT: PARTS REDUCER: TYPE REDUCER: MIXING INSTRUCTIONS: POTLIFE: WET FILM PER COAT: DRY FILM PER COAT: CLEAN-UP: SUBSTRATE: SUBSTRATE PREPARATION: PRIMER:
Spray
30-40 seconds DIN 4mm Cup 25°C
100 Parts WAC61753
20-30 Parts XPS90036 (Deionized Water) XPS90036 Reducing Solvent
Thoroughly hand-stir before application N/A N/A
10-15 microns Deionized Water Various Plastics N/A N/A
CURE SCHEDULES:
BAKE N/A FLASH 15-20 MINUTES Type Oven: N/A Temperature: 25°C (60% RH) Oven Temperature: 80°C Dust-Free N/A Oven Time: 30mins Dry to Handle: N/A Metal Temperature: N/A Dry to Recoat: N/A Time at Metal Temperature: N/A Dry to Pack: N/A Additional Information:
? Use with appropriate protective equipment. Must be blended with appropriate solvent system. ? Do not use alone. Use XPS Basecoat Reducer.
? Apply appropriate 2K curable clearcoat over basecoat.
Product Code: WAC60204 Revision # Date of Revision 1 2 3 4 5 6 7 8 9 10 11
Reason for Revision