loading实用标准
华为三层交换机配置方法（1）
(2008-07-21 11:27:34) 转载
标签： 分类： 工作汇报
杂谈
本文以河南平临高速所使用的华为华三通信的H3C S3600-28P-SI为例，配置前首先要确定型号后缀是SI还是EI，EI的支持所有协议，SI的不支持OSPS动态协议，因此SI配置路由时可以使用静态协议和RIP协议，具体配置如下：
[H3C]display current-configuration //显示当前配置 //以下开始配置
//第一步：划分VLAN，并描述 vlan 1
description local-S3600 vlan 2
description link-to-wenquan vlan 3
description link-to-ruzhou vlan 4
description link-to-xiaotun vlan 5
description link-to-baofeng vlan 6
description link-to-pingxi vlan 7
description link-to-pingnan vlan 8
文档大全
实用标准
description Uplink-to-Putian vlan 9
description link-to-pingxicentre //第二步：给VLAN 划网关 interface Vlan-interface2 description link to wenquan
ip address 10.41.77.41 255.255.255.192 interface Vlan-interface3 description link to ruzhou
ip address 10.41.77.105 255.255.255.192 interface Vlan-interface4 description link to xiaotun
ip address 10.41.77.169 255.255.255.192 interface Vlan-interface5 description link to baofeng
ip address 10.41.77.233 255.255.255.192 interface Vlan-interface6 description link to pingxi
ip address 10.41.78.41 255.255.255.192 interface Vlan-interface7 description link to pingnan
ip address 10.41.78.105 255.255.255.192 interface Vlan-interface8 description uplink to putian
ip address 10.41.244.102 255.255.255.252 interface Vlan-interface9
description link to pingxicentre ip address 10.41.80.233 255.255.255.192
文档大全
实用标准
//第三步：给VLAN 指定端口 interface Ethernet1/0/2 description link to wenquan port access vlan 2 interface Ethernet1/0/3 description link to ruzhou port access vlan 3 interface Ethernet1/0/4 description link to xiaotun port access vlan 4 interface Ethernet1/0/5 description link to baofeng port access vlan 5 interface Ethernet1/0/6 description link to pingxi port access vlan 6 interface Ethernet1/0/7 description link to pingnan port access vlan 7 interface Ethernet1/0/8 description uplink to putian port access vlan 8
interface Ethernet1/0/9 to Ethernet1/0/24 description link to pingxicentre port access vlan 9 //第四步：配置路由协议 //（1）用RIP配动态路由 rip
network 10.41.77.41 network 10.41.77.105
文档大全