loading
Create a Finish Procedure
Surface Milling removes all remaining stock from the workpiece. The Finish Mill By Limit Angle procedure mills horizontal and/or vertical areas (divided by a slope angle) using different machining technologies.
From the NC Toolbar, select the Create Procedure icon
.
Change the procedure type to Surface Milling/Finish Mill By Limit Angle.
Load the Preferred Values & Look for the Finish Mill By Limit Angle procedure and change the Cutter to Ball 8.
Under the Geometry tab, click on the Boundaries (Optional) parameter and select the bottom face of the part.
Cimatron E 7.1 Getting Started in NC Tutorial 33
Middle Mouse Click to accept the selection.
Cimatron E detects the entire closed contour automatically.
Middle mouse click to exit the Boundary selection.
34 Getting Started in NC Tutorial Cimatron E 7.1
Set the following parameters:
Cimatron E 7.1 Getting Started in NC Tutorial 35
Save & Calculate the procedure.
Hide the Fast Motions of the Toolpath by selecting the Hide Fast Motions option found within the Icons Toolbar.
Click Yes to refresh the display.
From the Icons Toolbar select the Global Wireframe Render mode.
36 Getting Started in NC Tutorial Cimatron E 7.1